Choose THOR-105573 when a 5000mAh design can accept 10mm nominal cell thickness but needs a smaller footprint than THOR-866898. The latter provides 7200mAh and is thinner at 8.6mm, but its 68 × 98mm footprint is substantially wider and longer. For the same 5000mAh capacity with lower thickness, THOR-905580 uses a 9 × 55 × 80mm envelope, trading 1mm less thickness for 7mm more length.

The 10 × 55 × 73mm value is the nominal bare-cell envelope. The current PCM-equipped drawing is approximately 10 × 55 × 75mm. Insulation, lead exit, connector position and wire bend radius can affect the final usable envelope, so confirm the production-intent drawing and sample fit before freezing the enclosure.

At 3.7V nominal and 5000mAh, THOR-105573 stores 18.5Wh. Actual runtime depends on load profile, regulator efficiency, system cutoff voltage, duty cycle, temperature and aging. Capacity and geometry do not establish continuous or peak-current capability; validate the intended load, protection circuit, wire and connector as one system.

• Stable 3.7 V nominal output for reliable power delivery
• Long cycle life — typically several hundred cycles, cost-efficient
• Built-in protection: overcharge, over-discharge, short-circuit
• Custom size, capacity, connector & PCM/BMS
• UN38.3 / MSDS ready; CE, KC, ROHS on request

Why Choose THOR Power

A vertically integrated lithium battery manufacturer (Dengzhou Xinju New Energy) with the scale and engineering depth to deliver custom LiPo cells reliably at volume.

3 factories, 800+ staff

Source-manufacturer scale — not a trading company.

200+ engineers

R&D led by a chief battery scientist for rapid custom design.

60,000 pouch cells / day

High-volume manufacturing with products exported across the US, Europe, Japan & Korea, SE Asia, Latin America and Africa.

End-to-end quality control

From raw material to finished cell.

Factory Photos

Automation Equipment

Testing Equipment

Warehouse & Certifications