3.7V 1500mAh LiPo Batteries — Compare Sizes for Your Device
Fit a 1500mAh cell into a portable medical or health-monitoring device while balancing finished-pack size, longer session runtime and a sensor-plus-display load.
A 1500mAh capacity target does not define one battery shape. Thin, wide and narrow-long pouch formats give portable medical and health-monitoring devices different ways to fit longer runtime into a wearable or handheld enclosure. Compare verified model dimensions, shortlist by estimated finished size, and confirm the continuous sensor load, display draw, protection and connector layout before freezing the mechanical design.
Bare & Estimated Finished Sizes
Custom PCM & Connector Options
Engineering Fit Review
Technical Overview
A 1500mAh LiPo battery supports longer-duration portable medical and health-monitoring devices while remaining compact enough to wear or carry. At 1500mAh, geometry can matter as much as nominal capacity: the same rating can be built in very different thickness, width and length combinations. In devices such as a portable vital-sign monitor or a patient monitoring device, the battery runs a continuous sensor-and-display load with periodic wireless updates across an extended session. Select by the finished-pack envelope and actual load profile, not by capacity alone.
Find a 1500mAh LiPo Battery for Your Available Space
Enter the available battery cavity to screen listed 1500mAh models by estimated finished dimensions. Any result is a potential match, not a fit guarantee; PCM, insulation, wiring, connector position, tolerance and clearance require final review.
21 listed 1500mAh models
Finished dimensions depend on PCM, insulation, connector and wire-harness configuration and are confirmed on the engineering drawing for the selected model.
Fit 1500mAh into a Portable Medical or Health Monitor
The listed THOR-424272 uses a nominal 4.2 × 42 × 72mm bare-cell envelope, while THOR-652686 is a narrow 6.5 × 26 × 86mm strip. Both store 1500mAh but place the volume on very different axes of the enclosure.
A monitoring device needs a geometry that holds a full session of runtime while leaving room for the sensor, display and connector inside a wearable or handheld body.
Same 1500mAh capacity, very different geometry. The listed models below all store 1500mAh, yet each one asks for completely different space inside a device:
THOR-424272
4.2 × 42 × 72 mm — the thinnest listed 1500mAh cell. Thin and wide; suits a flat wearable monitor.
THOR-652686
6.5 × 26 × 86 mm — a narrow, elongated strip. Suits a slim handheld monitor where width is limited.
THOR-103048
10 × 30 × 48 mm — thick with a small footprint. Trades thickness for a compact monitor body.
All three store 1500mAh, yet each needs different space. If thickness is the limit, start from the thin, wide models; if the device is a narrow strip or small block, a thicker cell can shrink the footprint. The geometry, not the capacity, decides the fit.
If 1500mAh is close to the packaging limit, compare adjacent 1200mAh, 1800mAh and 2000mAh options to see whether a different capacity band offers a better geometry.
Validate 1500mAh Current Capability for Extended Continuous Loads
The 1500mAh rating describes charge capacity, not maximum continuous or peak current. In a portable medical or health-monitoring device such as a vital-sign monitor, patient monitoring device or portable health monitor, the battery must run a continuous sensor-and-display load through an extended session, with periodic wireless-update peaks. Whether the cell sustains that profile depends on the specific cell model, C-rate, internal resistance, PCM and temperature. Use the battery runtime and capacity guide for energy planning, then validate loaded voltage, session runtime and low-state behavior with the actual electronics. A custom LiPo battery configuration should be reviewed when the standard assembly does not satisfy these constraints, and any medical or health-monitoring device requires project-specific validation and qualification.
Bare Cell Size vs Finished Battery Size
Bare 1500mAh dimensions describe the pouch cell before the complete protection and interconnect assembly is finalized. Component placement may extend thickness or length.
In a portable vital-sign or patient monitor, the finished pack must clear the sensor module, display, connector path and any strap or clip mount, and support a full monitoring session without a mid-session change.
Bare Cell Size
Raw pouch-cell dimensions
(T × W × L)
→
+ PCM, Insulation, Wires, Connector
Protection circuitry, insulation wrap, lead wires, connector & wire exit
→
Estimated Finished Size
Approximate assembled dimensions for initial screening
Use a configuration-specific finished drawing for CAD approval and leave the required compression-free clearance around the pouch.
How to Choose a 1500mAh LiPo Battery
Measure the Space
Record the maximum battery cavity: thickness × width × length.
Allow Clearance
Allow for manufacturing tolerance, insulation, assembly and long-term cell expansion.
Confirm the Load
Provide continuous and peak current requirements. Capacity alone does not define current capability.
Define the Assembly
Confirm PCM, connector, polarity, wire length, wire exit direction and labeling.
Verify With Samples
Confirm the final drawing, finished dimensions and sample fit before volume production.
Custom 1500mAh LiPo Battery Configuration
A custom 1500mAh pack review can cover pouch geometry, PCM, connector, polarity, wire length and routing, insulation, label and packaging. Feasibility depends on the combined mechanical and electrical specification.
Connector
Wire Length
Polarity
Wire Exit Direction
Label
Need a 1500mAh LiPo Battery for Your Project?
Tell us your available battery space, application, working current, peak current, connector requirement and quantity. Our engineering team will review the suitable 1500mAh model and finished battery configuration.
- Bare Cell Size
- —
- Approx. Finished Size
- —
Your information is used only to review and respond to your battery project request. Privacy Policy.
1500mAh LiPo Battery FAQ
What size is a 1500mAh LiPo battery?
1500mAh LiPo batteries come in multiple shapes rather than one standard size. Check the exact listed model dimensions and the finished-pack estimate for your enclosure.
Is bare-cell size the same as finished battery size?
No. Bare-cell measurements exclude at least some finished-pack elements. PCM, insulation, wires and connector placement can change the final mechanical envelope.
What current can a 1500mAh battery deliver?
Use the exact cell data and PCM design to confirm continuous and peak current. A 1500mAh capacity rating by itself is not a current rating, and a monitoring device runs a sustained sensor-and-display load rather than a single peak.
Can a 1500mAh LiPo battery be made thinner?
A thinner or narrower 1500mAh option may exist, but reducing one axis usually affects another. Engineering must validate any custom envelope and capacity target.
Should I choose 1200mAh or 1800mAh instead of 1500mAh?
A 1200mAh cell trims finished size for a smaller device; an 1800mAh cell extends session runtime when the enclosure allows a larger finished assembly. Compare finished-pack dimensions side by side rather than the capacity label alone.
Is a 1500mAh LiPo suitable for a portable vital-sign or patient monitor?
It can be considered when the finished-pack envelope fits and the selected cell sustains the continuous sensor-and-display load for a full session, plus wireless-update peaks. Confirm PCM behavior, connector routing, charging strategy and temperature range with the actual electronics; a medical device also requires project-specific validation and qualification.
What should I check for a portable medical training device?
For a rechargeable medical training or simulation device, confirm the compact finished size, connector layout and the sustained training-session current, then validate charging strategy and temperature range with the actual electronics. Capacity alone does not qualify a battery for a medical-adjacent device.
Related Pages
Why compare nearby capacities: A 1200mAh pack can reduce finished size for a smaller monitor. An 1800mAh or 2000mAh pack extends session runtime when the device can accept the added finished volume and charge time.