THOR 601230 3.7V 180mAh lithium polymer battery with PCM protection, red and black lead wires, and 2-pin connector

THOR 601230 3.7V 180mAh LiPo battery dimension drawing showing T×W×L = 6.0 × 12 × 32 mm (with PCM) and 2-pin connector polarity

THOR 601230 3.7V 180mAh lithium polymer battery specifications with dimensions and connector details

Customizable LiPo battery connector and wire harness options, with PH 2.0 mm shown for reference

Lithium polymer (LiPo) battery connector polarity guide showing red positive and black negative wires with correct and incorrect connection examples

Exploded multilayer structure of a LiPo pouch cell showing tabs, pouch film, electrodes, separator, current collectors and insulating layers

↓ Download Product Datasheet (PDF)Request a Quote

Description

THOR-601230 provides 180mAh in a narrow 6 × 12 × 30mm bare-cell envelope. Compared with THOR-501525, it is 3mm narrower and adds 30mAh, while requiring 1mm more thickness and 5mm more length. THOR-501227 keeps the same 12mm width in a shorter, thinner 5 × 12 × 27mm format with 130mAh.

The 6 × 12 × 30mm value is the nominal bare-cell envelope. The current PCM-equipped drawing is approximately 6 × 12 × 32mm. PCM, insulation, lead exit, connector height and wire bend radius can be significant in a 12mm-wide cavity, so confirm the complete production-intent assembly.

At 3.7V nominal and 180mAh, THOR-601230 stores approximately 0.67Wh. Runtime depends on standby current, active duty cycle, wireless or audio peaks, regulator efficiency, cutoff voltage, temperature and aging. Validate voltage sag and pulse demand with the actual device.

THOR-601230 Engineering & Fit Questions

How does THOR-601230 compare with THOR-501525?

THOR-601230 is narrower at 12mm and provides 180mAh, but it is 6mm thick and 30mm long. THOR-501525↗ is wider at 15mm, thinner at 5mm and shorter at 25mm, with 150mAh capacity.

Should I compare THOR-601230 with THOR-501227?

Yes. THOR-501227↗ keeps the same 12mm width but reduces the envelope to 5 × 12 × 27mm and capacity to 130mAh. It is the better comparison when thickness and length are tighter constraints than energy.

Are 6 × 12 × 30mm the finished battery dimensions?

No. They are nominal bare-cell dimensions. The current PCM-equipped drawing is approximately 6 × 12 × 32mm, while insulation, connector height, lead exit and wire routing can require additional clearance.

Stable 3.7 V nominal output for reliable power delivery
Long cycle life — typically several hundred cycles, cost-efficient
Built-in protection: overcharge, over-discharge, short-circuit
Custom size, capacity, connector & PCM/BMS
UN38.3 / MSDS ready; CE, KC, ROHS on request

Why Choose THOR Power

A vertically integrated lithium battery manufacturer (Dengzhou Xinju New Energy) with the scale and engineering depth to deliver custom LiPo cells reliably at volume.

3 factories, 800+ staff

Source-manufacturer scale — not a trading company.

200+ engineers

R&D led by a chief battery scientist for rapid custom design.

60,000 pouch cells / day

High-volume manufacturing with products exported across the US, Europe, Japan & Korea, SE Asia, Latin America and Africa.

End-to-end quality control

From raw material to finished cell.

Factory Photos

Automation Equipment

Testing Equipment

Warehouse & Certifications

Model	THOR-601230
Battery Type	Lithium Polymer (LiPo) pouch cell
Capacity	180 mAh
Certifications	UN38.3 / MSDS (IEC 62133-2, CE, KC on request)
MOQ	From 10 pcs for samples; production quoted per project
Customization	Size, capacity, connector, wire length, PCM/BMS, NTC, label

3.7V 180mAh Lithium Polymer (LiPo) Battery with Connector | THOR-601230

THOR-601230 is a 3.7V 180mAh LiPo pouch cell with approximately 0.67Wh nominal energy and a narrow 6 × 12 × 30mm bare-cell envelope. Compared with THOR-501525, it trades additional thickness and length for a 3mm reduction in width and 30mAh more capacity. Final fit depends on PCM, connector and wire integration.

Wholesale Pricing (USD)

Order Quantity	Reference Unit Price
10 – 99 pcs	—
100 – 999 pcs	—
1,000 – 9,999 pcs	—
10,000+ pcs	Contact for best price

Reference pricing for this model is being finalised. Talk to a Battery Engineer for a same-day quote.

Prices are for standard configuration reference only. Final pricing may vary by cell size, capacity, connector, wire length, PCM/BMS, label, packaging, certification requirements, and order quantity. Shipping cost is not included. MOQ: from 10 pcs for samples; production quantities are quoted per project.

Get an Engineering Quote

Custom sizes, capacities, connectors & PCM/BMS available. MOQ-friendly. Samples in days.

Battery Specification — THOR-601230

Mechanical Characteristics

Model	THOR-601230
Cell Type	Lithium Polymer (LiPo) pouch cell
Configuration	1S1P (customizable)
Dimensions (T×W×L)	6 × 12 × 30 mm (bare cell)
Dimension Tolerance	Thickness ±0.2 mm; Width/Length ±0.5 mm
With PCM Board	Length approx. +2 mm vs bare cell
Weight	Approx. 5 g
PCM / BMS	Included (standard)
NTC Thermistor	Optional
Connector	PH2.0 / Molex 1.25 (custom available)
Wire Length	Customizable
UN38.3	Test Summary available
Safety Data Sheet	SDS / MSDS available
IEC 62133-2	Available for selected models
RoHS / REACH	Compliance documents available

Electrical Specifications

Nominal Voltage	3.7 V
Rated Capacity	180 mAh
Energy	0.67 Wh
Charge Voltage	4.20 ± 0.03 V
Standard Charge	36 mA (0.2C), CC/CV to 4.20 V
Charge Cut-off Current	0.02C
Max. Charge Current	180 mA (up to 1C), model-specific
Discharge Cut-off Voltage	3.0 V
Standard Discharge	36 mA (0.2C)
Max. Continuous Discharge	180 mA (1C), model-specific
Internal Resistance	≤ 130 mΩ (1 kHz, 50% SOC, 25℃)
Cycle Life	≥ 500 cycles, ≥ 80% capacity
Cycle Test Condition	0.5C charge / 0.5C discharge, 3.0-4.2 V, 25 ± 2℃
Charge Temperature	0℃ ~ 45℃
Discharge Temperature	-20℃ ~ 60℃
Storage Temperature	-10℃ ~ 45℃ (≤ 1 month)
Capacity Retention	≥ 90% after 28 days @ 25℃
Note	Higher discharge-rate designs available upon engineering review

Protection Circuit (when PCM equipped)

Overcharge Detection	4.28 ± 0.03 V per cell
Overcharge Release	4.08 ± 0.05 V
Over-discharge Detection	2.75 ± 0.05 V
Over-discharge Release	3.00 ± 0.05 V
Overcurrent Protection	Per PCM design (2A ~ 5A typical)
Short-circuit Protection	Yes, auto-recovery

Values shown are THOR Power standard specifications for this cell class. Final parameters are confirmed in the engineering datasheet for your configuration.

Typical Applications — THOR-601230

TWS Charging Cases & Compact Headset Modules — PrimaryThe narrow 12 × 30mm footprint can suit charging-case or compact headset modules when the cavity accepts 6mm nominal thickness. Confirm charging peaks, connector location, thermal behavior and finished-pack fit.

Smart Pens & Narrow Sensor HousingsTHOR-601230 may suit pen-shaped electronics or narrow sensor housings that can use 30mm length. Validate standby drain, active load, wire exit and mechanical support.

Slim Tracking & Telemetry TagsThe 0.67Wh nominal energy can support low-duty tracking or telemetry tags after radio pulses, reporting interval, cutoff voltage and enclosure clearance are tested.