THOR 1160100 3.7V 10000mAh lithium polymer battery with PCM protection, red and black lead wires, and 2-pin connector

THOR 1160100 3.7V 10000mAh LiPo battery dimension drawing showing T×W×L = 11 × 60 × 102 mm (with PCM) and 2-pin connector polarity

THOR 1160100 3.7V 10000mAh lithium polymer battery specifications with dimensions and connector details

↓ Download Product Datasheet (PDF)Request a Quote

Description

Choose THOR-1160100 when a 60 × 100mm battery footprint is available and additional capacity matters more than reducing cell thickness by 1mm. Its 10000mAh rating and 11mm nominal bare-cell thickness distinguish it from THOR-1060100, the 8000mAh, 10mm option with the same nominal width and length. Capacity alone does not guarantee a particular operating time.

Reserve enough usable enclosure depth for the finished pack, not just the 11mm bare cell. The standard PCM-equipped drawing indicates approximately 11 × 60 × 102mm, while PCM placement, insulation, connector location, and wire exit can change the final envelope. Verify polarity, harness routing, bend radius, assembly tolerance, and allowance for normal pouch-cell expansion. If minimum thickness is the priority, the THOR-6060100 offers 5000mAh at 6mm nominal thickness in this footprint family.

At 3.7V nominal, 10000mAh corresponds to 37Wh. Validate the required runtime against measured processor, display, sensor, interface, and wireless loads, including standby and peak-current conditions. Regulator efficiency, device cutoff voltage, operating temperature, charging requirements, and battery aging also affect selection. Confirm continuous and peak current limits, connector and wire specifications, and the approved engineering drawing before sample approval.

THOR-1160100 Engineering & Fit Questions

What are the bare-cell and finished dimensions of THOR-1160100?

The nominal bare-cell envelope is 11 × 60 × 100mm. The current PCM-equipped drawing shows approximately 11 × 60 × 102mm. Final clearance must also account for PCM placement, insulation, connector location, wire exit, bend radius and normal pouch-cell expansion.

How does THOR-1160100 compare with THOR-1060100?

THOR-1060100↗ keeps the same nominal 60 × 100mm footprint at 10mm thickness and 8000mAh. THOR-1160100 adds 1mm of nominal thickness and raises capacity to 10000mAh. Choose between them from confirmed cavity depth and runtime requirements.

Is there a substantially thinner option in this footprint family?

THOR-6060100↗ uses a 6 × 60 × 100mm nominal bare-cell format at 5000mAh. It is the relevant comparison when minimum depth matters more than retaining the 10000mAh capacity of THOR-1160100.

Does 37Wh define the finished device runtime or discharge capability?

No. 37Wh is the nominal energy calculated from 3.7V and 10000mAh. Actual runtime depends on the measured load profile, regulator efficiency, cutoff voltage, temperature and aging. Continuous and peak current limits must be confirmed from released cell, PCM, wire and connector data.

Stable 3.7 V nominal output for reliable power delivery
Long cycle life — typically several hundred cycles, cost-efficient
Built-in protection: overcharge, over-discharge, short-circuit
Custom size, capacity, connector & PCM/BMS
UN38.3 / MSDS ready; CE, KC, ROHS on request

Why Choose THOR Power

A vertically integrated lithium battery manufacturer (Dengzhou Xinju New Energy) with the scale and engineering depth to deliver custom LiPo cells reliably at volume.

3 factories, 800+ staff

Source-manufacturer scale — not a trading company.

200+ engineers

R&D led by a chief battery scientist for rapid custom design.

60,000 pouch cells / day

High-volume manufacturing with products exported across the US, Europe, Japan & Korea, SE Asia, Latin America and Africa.

End-to-end quality control

From raw material to finished cell.

Factory Photos

Automation Equipment

Testing Equipment

Warehouse & Certifications

Model	THOR-1160100
Battery Type	Lithium Polymer (LiPo) pouch cell
Capacity	10000 mAh
Certifications	UN38.3 / MSDS (IEC 62133-2, CE, KC on request)
MOQ	From 10 pcs for samples; production quoted per project
Customization	Size, capacity, connector, wire length, PCM/BMS, NTC, label

THOR-1160100 3.7V 10000mAh LiPo Battery – 11×60×100mm

THOR-1160100 is a 1S 3.7V 10000mAh lithium polymer (LiPo) battery based on a nominal 11 × 60 × 100mm bare pouch cell. It offers more capacity within the same broad, flat 60 × 100mm footprint as THOR-1060100 when an additional 1mm of nominal cell thickness is acceptable. This makes it an option for field inspection terminals, industrial monitors, data-acquisition equipment, and portable imaging devices with demanding runtime targets. The current PCM-equipped drawing shows approximately 11 × 60 × 102mm. Final pack dimensions depend on PCM layout, insulation, wire exit, and connector selection. PCM, connector, polarity, wire length, optional NTC, and labeling can be customized.

Wholesale Pricing (USD)

Order Quantity	Reference Unit Price
10 – 99 pcs	$8.00 / pc
100 – 999 pcs	$6.50 / pc
1,000 – 9,999 pcs	$5.50 / pc
10,000+ pcs	Contact for best price

Reference pricing is shown above. Talk to a Battery Engineer for a project-specific quotation.

Prices are for standard configuration reference only. Final pricing may vary by cell size, capacity, connector, wire length, PCM/BMS, label, packaging, certification requirements, and order quantity. Shipping cost is not included. MOQ: from 10 pcs for samples; production quantities are quoted per project.

Get an Engineering Quote

Custom sizes, capacities, connectors & PCM/BMS available. MOQ-friendly. Samples in days.

Battery Specification — THOR-1160100

Mechanical Characteristics

Model	THOR-1160100
Cell Type	Lithium Polymer (LiPo) pouch cell
Configuration	1S1P (customizable)
Dimensions (T×W×L)	11 × 60 × 100 mm (bare cell)
Dimension Tolerance	Thickness ±0.2 mm; Width/Length ±0.5 mm
With PCM Board	Length approx. +2 mm vs bare cell
Weight	Approx. 139 g
PCM / BMS	Included (standard)
NTC Thermistor	Optional
Connector	PH2.0 / Molex 1.25 (custom available)
Wire Length	Customizable
UN38.3	Test Summary available
Safety Data Sheet	SDS / MSDS available
IEC 62133-2	Available for selected models
RoHS / REACH	Compliance documents available

Electrical Specifications

Nominal Voltage	3.7 V
Rated Capacity	10000 mAh
Energy	37 Wh
Charge Voltage	4.20 ± 0.03 V
Standard Charge	2.0 A (0.2C), CC/CV to 4.20 V
Charge Cut-off Current	0.02C
Max. Charge Current	10.0 A (up to 1C), model-specific
Discharge Cut-off Voltage	3.0 V
Standard Discharge	2.0 A (0.2C)
Max. Continuous Discharge	10.0 A (1C), model-specific
Internal Resistance	≤ 30 mΩ (1 kHz, 50% SOC, 25℃)
Cycle Life	≥ 500 cycles, ≥ 80% capacity
Cycle Test Condition	0.5C charge / 0.5C discharge, 3.0-4.2 V, 25 ± 2℃
Charge Temperature	0℃ ~ 45℃
Discharge Temperature	-20℃ ~ 60℃
Storage Temperature	-10℃ ~ 45℃ (≤ 1 month)
Capacity Retention	≥ 90% after 28 days @ 25℃
Note	Higher discharge-rate designs available upon engineering review

Protection Circuit (when PCM equipped)

Overcharge Detection	4.28 ± 0.03 V per cell
Overcharge Release	4.08 ± 0.05 V
Over-discharge Detection	2.75 ± 0.05 V
Over-discharge Release	3.00 ± 0.05 V
Overcurrent Protection	Per PCM design (2A ~ 5A typical)
Short-circuit Protection	Yes, auto-recovery

Values shown are THOR Power standard specifications for this cell class. Final parameters are confirmed in the engineering datasheet for your configuration.

Typical Applications — THOR-1160100

Rugged Field Inspection & Service Terminals — PrimaryThe 10000mAh rating and 60 × 100mm footprint make THOR-1160100 an option for rugged field inspection and service terminals when an 11mm bare-cell depth is available. Confirm processor, display, communication, and peak-current requirements before sample approval.

Portable Industrial Monitoring DevicesA capacity-focused LiPo option for portable industrial monitoring equipment using displays, sensors, data logging, and wireless communication. Check the 11mm cell profile and final PCM-equipped envelope against the enclosure cavity.

Portable Data-Acquisition EquipmentThe 10000mAh pouch cell can suit portable data-acquisition and field-logging devices when a 60 × 100mm battery footprint is available. Validate sensor and interface loads, wireless duty cycle, cutoff voltage, and required runtime.

High-Runtime Portable Imaging & Survey EquipmentSuitable for portable imaging, survey, and inspection electronics where capacity takes priority over minimum cell thickness. Confirm display, processor, and accessory demand, then verify connector placement and the finished-pack clearance.