THOR 1060100 3.7V 8000mAh lithium polymer battery with PCM protection, red and black lead wires, and 2-pin connector

THOR 1060100 3.7V 8000mAh LiPo battery dimension drawing showing T×W×L =10 × 60 × 102 mm (with PCM) and 2-pin connector polarity

Exploded multilayer structure of a LiPo pouch cell showing tabs, pouch film, electrodes, separator, current collectors and insulating layers

Customizable LiPo battery connector and wire harness options, with PH 2.0 mm shown for reference

Lithium polymer (LiPo) battery connector polarity guide showing red positive and black negative wires with correct and incorrect connection examples

↓ Download Product Datasheet (PDF)Request a Quote

Description

Choose THOR-1060100 when the device can accommodate a 60 × 100mm battery footprint and needs 8000mAh while keeping nominal cell thickness near 10mm. Compared with THOR-1160100, it uses the same nominal width and length with 1mm less cell thickness, a useful trade-off when enclosure depth is tighter than the available board area.

Check the usable battery cavity rather than relying only on bare-cell dimensions. The standard PCM-equipped drawing indicates approximately 10 × 60 × 102mm, but the final pack envelope depends on PCM position, insulation, connector location, and wire exit. Confirm polarity and allow room for assembly tolerance, harness bend radius, and normal pouch-cell expansion. If even 10mm is too deep, compare the THOR-6060100 5000mAh, 6mm cell in the same footprint family.

At 3.7V nominal, 8000mAh corresponds to 29.6Wh. Actual runtime depends on the device load profile, regulator efficiency, cutoff voltage, display, sensor or wireless duty cycle, temperature, and battery aging. Before approving samples, confirm continuous and peak current, charging requirements, connector and wire specifications, required runtime, and the final engineering drawing.

THOR-1060100 Engineering & Fit Questions

What are the bare-cell and finished dimensions of THOR-1060100?

The nominal bare-cell envelope is 10 × 60 × 100mm. The current PCM-equipped drawing shows approximately 10 × 60 × 102mm. Connector location, insulation, wire exit and bend radius can increase the usable cavity requirement, so confirm the production-intent drawing before freezing the enclosure.

How does THOR-1060100 compare with THOR-1160100?

THOR-1160100↗ uses the same nominal 60 × 100mm footprint but increases bare-cell thickness from 10mm to 11mm and nominal capacity from 8000mAh to 10000mAh. Choose THOR-1060100 when enclosure depth is tighter; choose THOR-1160100 when the extra millimetre is acceptable and more nominal energy is required.

What is the thinner alternative in the same 60 × 100mm footprint family?

THOR-6060100↗ uses a 6 × 60 × 100mm nominal bare-cell format at 5000mAh. It is the shallower comparison when the cavity cannot accept the 10mm profile of THOR-1060100.

What must be confirmed before approving THOR-1060100 for an OEM design?

Confirm continuous and peak current requirements, charging profile, PCM limits, connector family and polarity, wire gauge and length, optional NTC, final pack dimensions, operating temperature and measured runtime in the actual device. The 29.6Wh nominal-energy calculation does not by itself establish runtime or discharge capability.

Stable 3.7 V nominal output for reliable power delivery
Long cycle life — typically several hundred cycles, cost-efficient
Built-in protection: overcharge, over-discharge, short-circuit
Custom size, capacity, connector & PCM/BMS
UN38.3 / MSDS ready; CE, KC, ROHS on request

Why Choose THOR Power

A vertically integrated lithium battery manufacturer (Dengzhou Xinju New Energy) with the scale and engineering depth to deliver custom LiPo cells reliably at volume.

3 factories, 800+ staff

Source-manufacturer scale — not a trading company.

200+ engineers

R&D led by a chief battery scientist for rapid custom design.

60,000 pouch cells / day

High-volume manufacturing with products exported across the US, Europe, Japan & Korea, SE Asia, Latin America and Africa.

End-to-end quality control

From raw material to finished cell.

Factory Photos

Automation Equipment

Testing Equipment

Warehouse & Certifications

Model	THOR-1060100
Battery Type	Lithium Polymer (LiPo) pouch cell
Capacity	8000 mAh
Certifications	UN38.3 / MSDS (IEC 62133-2, CE, KC on request)
MOQ	From 10 pcs for samples; production quoted per project
Customization	Size, capacity, connector, wire length, PCM/BMS, NTC, label

THOR-1060100 3.7V 8000mAh LiPo Battery – 10×60×100mm

THOR-1060100 is a 1S 3.7V 8000mAh lithium polymer (LiPo) battery with a nominal 10 × 60 × 100mm bare pouch cell. Its 10mm cell thickness balances capacity and enclosure depth within a broad, flat 60 × 100mm footprint for portable test instruments, analyzers, handheld terminals, and inspection equipment. The current PCM-equipped drawing shows approximately 10 × 60 × 102mm; finished dimensions can vary with PCM placement, insulation, wire exit, and connector choice. PCM, connector type, polarity, wire length, optional NTC, and labeling can be configured for OEM integration.

Wholesale Pricing (USD)

Order Quantity	Reference Unit Price
10 – 99 pcs	$7.80 / pc
100 – 999 pcs	$6.30 / pc
1,000 – 9,999 pcs	$5.30 / pc
10,000+ pcs	Contact for best price

Reference pricing is shown above. Talk to a Battery Engineer for a project-specific quotation.

Prices are for standard configuration reference only. Final pricing may vary by cell size, capacity, connector, wire length, PCM/BMS, label, packaging, certification requirements, and order quantity. Shipping cost is not included. MOQ: from 10 pcs for samples; production quantities are quoted per project.

Get an Engineering Quote

Custom sizes, capacities, connectors & PCM/BMS available. MOQ-friendly. Samples in days.

Battery Specification — THOR-1060100

Mechanical Characteristics

Model	THOR-1060100
Cell Type	Lithium Polymer (LiPo) pouch cell
Configuration	1S1P (customizable)
Dimensions (T×W×L)	10 × 60 × 100 mm (bare cell)
Dimension Tolerance	Thickness ±0.2 mm; Width/Length ±0.5 mm
With PCM Board	Length approx. +2 mm vs bare cell
Weight	Approx. 126 g
PCM / BMS	Included (standard)
NTC Thermistor	Optional
Connector	PH2.0 / Molex 1.25 (custom available)
Wire Length	Customizable
UN38.3	Test Summary available
Safety Data Sheet	SDS / MSDS available
IEC 62133-2	Available for selected models
RoHS / REACH	Compliance documents available

Electrical Specifications

Nominal Voltage	3.7 V
Rated Capacity	8000 mAh
Energy	29.6 Wh
Charge Voltage	4.20 ± 0.03 V
Standard Charge	1.6 A (0.2C), CC/CV to 4.20 V
Charge Cut-off Current	0.02C
Max. Charge Current	8.0 A (up to 1C), model-specific
Discharge Cut-off Voltage	3.0 V
Standard Discharge	1.6 A (0.2C)
Max. Continuous Discharge	8.0 A (1C), model-specific
Internal Resistance	≤ 30 mΩ (1 kHz, 50% SOC, 25℃)
Cycle Life	≥ 500 cycles, ≥ 80% capacity
Cycle Test Condition	0.5C charge / 0.5C discharge, 3.0-4.2 V, 25 ± 2℃
Charge Temperature	0℃ ~ 45℃
Discharge Temperature	-20℃ ~ 60℃
Storage Temperature	-10℃ ~ 45℃ (≤ 1 month)
Capacity Retention	≥ 90% after 28 days @ 25℃
Note	Higher discharge-rate designs available upon engineering review

Protection Circuit (when PCM equipped)

Overcharge Detection	4.28 ± 0.03 V per cell
Overcharge Release	4.08 ± 0.05 V
Over-discharge Detection	2.75 ± 0.05 V
Over-discharge Release	3.00 ± 0.05 V
Overcurrent Protection	Per PCM design (2A ~ 5A typical)
Short-circuit Protection	Yes, auto-recovery

Values shown are THOR Power standard specifications for this cell class. Final parameters are confirmed in the engineering datasheet for your configuration.

Typical Applications — THOR-1060100

Portable Test & Measurement Instruments — PrimaryThe 8000mAh rating and 10mm bare-cell profile make THOR-1060100 an option for portable test and measurement instruments with a flat 60 × 100mm battery cavity. Confirm continuous load, peak current, and required runtime before sample approval.

Portable Air-Quality & Gas AnalyzersThis LiPo battery can fit portable air-quality, gas-sensing, and environmental analyzers that accommodate its broad, shallow footprint. Check sensor duty cycle, display and wireless loads, operating temperature, and peak-current requirements.

Handheld Data & Field-Service TerminalsThe 60 × 100mm footprint can suit larger handheld data terminals and field-service electronics where capacity matters but depth remains constrained. Confirm the finished pack cavity, connector, polarity, PCM placement, and wire exit.

Portable Imaging & Inspection EquipmentA relatively flat 8000mAh pouch-cell option for portable inspection cameras, imaging monitors, and electronic inspection tools. Verify display and processor demand, accessory power, and finished-pack dimensions before approval.